Home   


X-Plane : Setting up on Linux Mint

WED for Linux          Overlay Editor for Linux

X-Plane was first wriiten for an Apple Macintosh (MAC) operating system and is now widely used on a Microsoft Windows operating system.  Much of the additional development has been with the Windows market in mind.  A number of X-Plane users also use a Linux operating system.

With a Windows PC that was limited in RAM and Graphic Cache, I decided to update to a new computer with a Linux only system.  Linux is a complex family of simple operating systems with different front ends.  The system slots compatible software together in order to suit the users needs.  Ubunta or Debian seem to be the most popular base systems.  The system I chose to use is Linux Mint Cinnamon. which is an Ubunta bases OS.  This is how the setup went for me.

I obtained my system from Wired2Fire after speaking to their representitives at the FlightSim 2018 RAF Cosford meeting. It is an extended  PC, 3 monitors and stand, flight stick, keyboard and mouse, plus all of the cables etc.  The machine came loaded with Linux Mint and X-Plane by arrangement.  Talk to the provider you use directly to see what is workable and affordable to you.

First Check - That you have the Linux Administrative Password and the X-Plane install Key.  Without them, you cannot do anything with the setup.

When assembling the system - make sure that each moitor is connected to the back of the PC case in an appropriate slot.  You may require an HDMI adaptor which should be fixed into an HDMI slot that is not part of the Graphic card board for the primary monitor.  The side monitors or others can be plugged into any HDMI, VGA or DVI port.

If you have an application called "Xinerama" installed, this needs removing or switching off.  This app will limit output to a single screen only if active.

Make an internet cable connection to your modem (Wireless conections will slow you down to their maximum capacity) before booting up the computer for the first time.

First - Start Linux and make sure you have the Welcome to Linux Mint window on screen.  Do not close this window untill all of your system is working how you want it.  The first bootup will only be on one screen unless you have RandR installed and set up.

Set up Firefox to your internet provider as your primary browser.  You may also want to set up Thunderbird for E-Mail.

Second -  download the OpenAL program and the C++ compiler needed to run X-Plane.

Open the Terminal and type in (or copy and paste) the following commands to obtain this software:

          sudo apt-get install libC++1 libC++abi1     [return]

You will need your Linux administration password to do this action.  This will install the C++ software on your system from a preset command line.  When this is complete then type in turn: 

          sudo apt-get install libopenal-dev     [return]

          sudo apt-get install libportaudio2 sndiod     [return]

This will install the OpenAL software and the audio driver and then X-Plane will be able to work on your Linux computer.

Third - Go to the Welcome to Linux Mint window on screen and open Timeshift to set a recovery backup of your system (Daily for 2 days and monthly for 2 months is good during setup).  This makes a restore point in case anything gets messed up.

Go to Drive Manager and set your graphics card to point to the one installed for your PC as recommended and not the open source one.

Make sure that the "show this dialoge box as startup" is ticked, and close the window down.  You will need this window later.

Fourth - Using the menu button (bottom Left), Go to System Settings then Applets.  Type RandR in the search and when the XRandR monitor control applet comes up, highlight and download it.  This will allow you to set up the screens as separate linked monitors;

Close down the  system and re-boot,

Go to the start menu and type RandR in  the search box.  Display should come up - Open this application.  You should see three screens in the active box matched to the boxes in the corner of each monitor. Click on the monitors in the active box in turn.  For each monitor, the green marker should have a tick in it (Next to the set primary screen button). If the box is not ticked, the monitor will be inactive.  Click on the centre monitor and press the set primary screen button.

You may also want to go the the start menu and type UFW in the search box, to set up the firewall.

Now - you are ready to load X-Plane for the first time.........

 X-Plane 11 version 2.6 will only load onto the primary screen, but version 3.0 onwards should work on all 3 screens once they are set in the Graphics setup menu.

There is a software fix available for earlier versions of X-Plane 11 to set them to all screens here.  It takes a bit of searching but the fix for “Output/preferences/X-Plane Window Positions.prf” is in there.  All 3 screens will appear in the centre screen.  You will need to drag them across to the appropriate screen and resize them to fit (do not set at full screen or they are likely to fill all 3 screens at once).