Strings are made up of equally spaced objects that are placed in a line. The use of strings is relatively simple, as long as you understand the nature of the beast you are dealing with.

The diagram illustrates the basic idea that a string is a line of objects set at relative ground level. The upper string is spaced at 3m and the lower string is spaced a 1m. The most common error in using strings is to miss setting the string spacing, the default is usually 5m.

Here, a hedge string has been used. The far edge is spaced at 1m and the near hedge is spaced at 5m. Strings are often used to position walls, fences and hedges as well as canopies and other uniform structures. Working on a level surface, strings can be used with gay abandon. The challenge in using strings is to cope with the needs of sloping landscapes.

When using strings on variable slopes, the resulting scenery can be quite dramatically wrong. When moving beween two adjacent nodes of the string, the association of the units is often displayed in a linear way. This is fine on a constant slope, but on a variable slope (in X-Plane 10) the string may stand proud or sink below ground. It is important to place string nodes close together on slopes and have a node at every change of slope.

Two wooden fence strings running over an incline. It can be seen how the components of the string sit on this steep slope. Spacing on both is 5.0 ft and the near fence has many more string nodes than the far fence. In X-Plane 11, the strings sit much better in the scenery.
Where a string fence or hedge looks wrong on the landscape, a set of scenery objects may work better. I this instance, a small fence is used to be placed up a shallow incline.
The fence is created as three objects - one being level, the second being at a 2 dergee incline and the third at a 5 degree incline. By placing the fences in line and using the appropriate inclined object file, a reasonable representation of a fence sitting on a shallow incline can be acheived. It is a fiddle to get a good result, but close to a runway, this may be the only option.
Using strings requires some degree of trial and error and, where the scenery has an irregular surface, some workarounds may be needed. With a little inginuity, anything is possible.

Fences and barriers added to the scenery using .str lines from library files.